X-Tronic Model #3020-XTS Digital Display Soldering Iron Station Review

If you want a best model of Soldering Iron Station, then you can check this one. Obviously X-Tronic Model #3020-XTS is a good one for all DIY expert. Again many one purchases it and reviewed that it is one of the best.  

After spending more than 7 days researching and testing, we took the plunge that the X-Tronic Model 3020-XTS LED Display Soldering Iron Station is the best for beginners and casual hobbyists. 

X-Tronic's 3020-XTS Specifications

Maximum Power Output

75 Watts (15 Watts for Soldering Iron Mother Board/60 Watts for Soldering Iron)

Temperature Range

392°F to 896°F or 200°C to 480°C

Stability Of Temperature

±2°C (Static)

Temperature Of Operating

0°C to 40°C Or 32°F to104°F

Temperature Of Storage

-20°C to 80°C (-4°F to176°F)

Soldering Iron Cord

40 Inch Very Pliable Soldering Iron Cord (Virtually NO Memory)

Type of Power Cord

Power Cord: USA Type B – 3 Pin Grounded Plug – 15 Amp

Rated Voltage

AC 110V/60 Hz - NO 220V Available

X-Tronic's 3020-XTS Features

Safety Features

Anti-Statically Designed & ESD Safe

Celsius/Fahrenheit

Change from Celsius to Fahrenheit with with Flip of a Toggle Switch

Sleep Timer

10 Minutes

Digital LED Display

Bright Blue LED Display for Temperature • Very Visible

PID Technology

Proportional-Integral-Derivative Heating Technology often referred to as "Magic Temperature Compensation

Soldering Iron Holder

Chromed Spring Steel with "Bakelite" Polymer Insert • No Heat Transfer

The description of X-Tronic Model #3020-XTS Soldering Station

  • The X-Tronic Model 3020 Digital 75 Watt Soldering Station is a Powerful “Quick Temp” Unit and is manufactured for the Beginner as well as Expert Users and will Definitely Exceed Your Expectations with its Quality & Durability compared to any Soldering Iron Station in its Class. This Unit takes less than 30 Seconds to heat up from 200°C to 480°C (392°F to 896°F)
  • The Complete Kit Includes: 75-Watt X-Tronic model 3020-xts Soldering Station (60 Watts used for Soldering Iron &15 Watts used for Mini Mother Board in Soldering Iron) with 2 Helping Hands for Propping Up Smaller PCB’s right in front of the unit for you to work on along with a Side Mount Solder Roll Holder, Spring Style Soldering Iron Holder & a Brass Sponge Tip Cleaner with Supply of Cleaning Flux in the Tin plus a Wet Sponge.
  • Features: ESD Safe, 10 Minute Sleep Timer, Centigrade to Fahrenheit Toggle Switch, Blue LED Readout on Control Panel, PSD (Proportional-Integral-Derivative) Technology often referred to as Magic Temperature Compensation Technology, 40 Inch Very Pliable Soldering Iron Cord (Virtually No Memory) and a 55 Inch Power Cord from Wall Plug to Main Unit.
  • PLEASE NOTE: The Main (First) Photo shows the Brass Sponge Tip Cleaner with the soldering Flux In the Round Metal Tin Separately from the Soldering Station and also shows this same Container Mounted In the Main Unit - This is FOR PHOTO PURPOSES ONLY. There is "ONLY ONE" of these Containers that come with this Soldering Station.
  • ALL X-Tronic model 3020-xts Products come with a 30-Day Unconditional Money Back Guaranty which also includes a 3-Year Warranty with the Cost of Parts and Labor Included. PLEASE SCROLL DOWN THIS PAGE FOR MANY MORE PHOTOS & INFORMATION ON THIS PRODUCT!
Click Here to Leave a Comment Below 0 comments

Leave a Reply: